中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
  GB/T 43073-2023
气动 测量排气消声器声压级的试验方法(中英文版)
Pneumatics - Test method for measuring sound pressure levels of exhaust mufflers
  GB/T 6683.3-2023
石油及相关产品 测量方法与结果精密度 第3部分:试验方法已发布精密度数据的监测和验证(中英文版)
Petroleum and related products—Measurement methods and precision of results—Part 3: Monitoring and verification of published precision data for test methods
  SJ/T 11820-2022
半导体分立器件直流参数测试设备技术要求和测量方法(中英文版)
Technical requirements and measurement methods for DC parameter test equipment of semiconductor discrete devices
  GB/T 41641-2022
力学性能测量 REBCO带材室温拉伸试验方法(中英文版)
Measurement of mechanical properties - Tensile test method for REBCO strip at room temperature
  GB/T 13789-2022
用单片测试仪测量电工钢带(片)磁性能的方法(中英文版)
Method for Measuring Magnetic Properties of Electrical Steel Strip (Sheet) with Single Chip Tester
  GB/T 40346-2021
植物保护机械 水平喷杆喷雾机潜在喷雾漂移试验台测量方法(中英文版)
Equipment for crop protection—Method for measurement of potential spray drift from horizontal boom sprayers by the use of a test bench
  GB/T 20081.3-2021
气动 减压阀和过滤减压阀 第3部分:测试减压阀流量特性的可选方法(中英文版)
Pneumatic fluid power—Compressed air pressure regulators and filter-regulators—Part 3:Alternative test methods for measuring the flow-rate characteristics of pressure regulators
  GB/T 1551-2021
硅单晶电阻率的测定 直排四探针法和直流两探针法(中英文版)
Test method for measuring resistivity of monocrystal silicon—In-line four-point probe and direct current two-point probe method
  GB/T 9966.9-2021
天然石材试验方法 第9部分:通过测量共振基本频率测定动力弹性模数(中英文版)
Test methods for natural stone—Part 9: Determination of the dynamic modulus of elasticity by measuring the fundamental resonance frequency
  GB/T 15972.30-2021
光纤试验方法规范 第30部分:机械性能的测量方法和试验程序 光纤筛选试验(中英文版)
Specifications for optical fibre test methods—Part 30: Measurement methods and test procedures for mechanical characteristics—Fibre proof test
  GB/T 5095.2303-2021
电子设备用机电元件 基本试验规程及测量方法 第23-3部分:屏蔽和滤波试验 试验23c:连接器和附件的屏蔽效果 线注入法(中英文版)
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-3:Screening and filtering tests—Test 23c:Shielding effectiveness of connectors and accessories—Line injection method
  GB/T 5095.2307-2021
电子设备用机电元件 基本试验规程及测量方法 第23-7部分:屏蔽和滤波试验 试验23g:连接器的有效转移阻抗(中英文版)
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-7: Screening and filtering tests—Test 23g: Effective transfer impedance of connectors
  GB/T 41105.3-2021
无损检测? X射线管电压的测量和评价 第3部分:能谱法(中英文版)
Non-destructive testing -- Measurement and evaluation of the X-ray tube voltage -- Part 3: Spectrometric method
  GB/T 41105.2-2021
无损检测? X射线管电压的测量和评价 第2部分:厚板滤波法稳定性核查(中英文版)
Non-destructive testing -- Measurement and evaluation of the X-ray tube voltage -- Part 2: Constancy check by the thick filter method
  GB/T 41105.1-2021
无损检测 X射线管电压的测量和评价 第1部分:分压法(中英文版)
Non-destructive testing—Measurement and evaluation of the X-ray tube voltage—Part 1:Voltage divider method
  GB/T 6683.1-2021
石油及相关产品 测量方法与结果精密度 第1部分:试验方法精密度数据的确定(中英文版)
Petroleum and related products—Precision of measurement methods and results—Part 1: Determination of precision data in relation to methods of test
  GB/T 26277-2021
轮胎电阻测量方法(中英文版)
Test method for measuring electrical resistance of tyres
  GB/T 39042-2020
电工钢单片磁性能测试 H线圈法(中英文版)
Measurement of the magnetic properties of electrical steels by means of a single sheet tester—H-coil method
  GB/T 12967.1-2020
铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第1部分:耐磨性的测定(中英文版)
Test methods for anodic oxidation coatings and organic polymer coatings of aluminium and aluminium alloys―Part 1: Measurement of abrasion resistance
  GB/T 34874.6-2020
产品几何技术规范(GPS) X射线三维尺寸测量机 第6部分:工件的检测方法(中英文版)
Geometrical product specifications (GPS)—X-ray three dimensional size measuring machines—Part 6: Testing method of workpieces

找到:187條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: 1 2 3 4 5 6 7 8 9 10